Waterhill Light Fixture in Chrome by Moen.
and gave them a good wipe down to get them nice and clean.Mine were actually a bit crusty and rusty too but you’ll see that it didn’t matter at all.
I like rubbing alcohol because it does a great job of cleaning but evaporates quickly so you can get to painting right away.. Painting the Vent Covers.It’s painting time!I used Krylon satin finish spray paint in.
I did 4 light coats with about 5 minutes of drying time in between.2 coats coming from one direction, and then 2 coming from the other direction to get under all the slanted bits.
There’s no need to do the sides since they’ll be hiding inside the hole.
It looks like it should be more complicated than that, but it really isn’t!.Unfortunately, (or fortunately, I’m not sure which) I don’t have a scratch and sniff blog quite yet, so I can’t show you the difference in smell in here, but if you happen to have some of these basic ingredients around anyway, or you think your carpet might have a weird smell to it, it’s worth trying out and seeing for yourself!.
This post contains affiliate linksLast time I updated you on the master bedroom, I told you about some of the things that I’d picked up to go in there and I also shared a few things that still really needed my attention in here to keep things moving along in the right direction.One of the many little things that were bugging me was that the cords from the bedside table lamps were just hanging out there, flapping in the wind for everyone to see.. That outlet is really really in the middle of the wall, right in plain sight.
It’s about as in the middle of that wall as it can get.I could have just painted everything to try to make it blend in with the wall, and that would have been just fine, but I felt like trying something a little more fun..